iCarsoft FR V2 - Feilkodeleser for Citroen, Peugeot, Renault, Dacia, Fiat, Alfa Romeo

Da har endelig den nye modellen FR V2 ankommet! Dette er en meget god feilkodeleser for Citroen, Peugeot, Renault, Fiat, Alfa Romeo og Dacia. FR V2 er et merkespesifikt verktøy fra iCarsoft som tar full diagnose på disse bilmerkene.

TilbudNOK1 990,00 Førpris:NOK2 190,00 Rabatt -9% inkl. mva.
Vurdering:
(6) (1 anmeldelse)
  • Produktinfo
  • Produktanmeldelser (1)

iCarsoft FR V2 er etterfølgeren til den gamle CP2 og er en merkespesifikk feilkodeleser som tar full diagnose på Citroen, Peugeot, Renault og Dacia. Nytt på dette verktøyet er at den også tar regenerering av DPF! Denne har også nå kommet med Norsk språk!

Funksjoner:

• FR V2 kan lese og slette feilkoder på alle systemer som motor, girkasse, ABS og airbag etc.
• Lese datastrømmen
• Full ECU diagnose (leser og sletter feilkoder på motor, airbag, ABS, gir, bremser, sensorer mm.)
• Gjelder alle modeller utstyrt med OBDII-16 DLC
• Enkel å bruke med Metal Dome Keys
• Olje / Service reset: Service påminnelser, bremsekloss reset, styrevinkelsensor kalibrering etc.
• EPB: Leser/nullstiller parkbrems varsel, Leser og sletter EPB / SBC feilkoder
• Slår av ECU og bremsevarsellampe, diagnoserer EPB / SBC caliper funksjonalitet, nullstiller bremsekloss tykkelse etc.
• ABS / Airbag: Diagnoserer ABS / SRS system koder, leser / sletter koder av ABS / SRS system og slår av ABS / SRS varsellampe, utfører toveis tester ABS-magnetventiler, henter ABS / SRS ECU informasjon etc.
• ETC

Kompatibilitet:

Fungerer til alle Citroen, Peugeot, Renault, Fiat, Alfa Romeo -og Dacia som er nyere enn 2001 og er OBD2-kompatibel. Er de eldre vil de også normalt fungere, men da trengs det som regel en adapter. Om du er usikker, ta kontakt med oss i chatten nede til høyre eller ta kontakt med oss på tlf 90140745.


OBD2 funksjoner:

1. Leser feilkoder
2. Sletter feilkoder
3. I / M Readiness - I / M Readiness indikerer hvorvidt de ulike utslippsrelaterte systemer på kjøretøyet fungerer som det skal og er klar for inspeksjon og vedlikehold testing.
4. data Stream
5. Freeze Frame - Når det oppstår en utslippsrelatert feil, er visse maskinforhold registrert av kjørecomputer. Denne informasjon blir referert til som freezeframe data. Freeze data er et øyeblikksbilde av driftsforholdene på tidspunktet for en utslippsrelatert feil.
6. O2 Sensor Test - Dette alternativet gir gjenfinning og visning av O2 sensor testresultater for de sist utførte tester fra bilens kjørecomputer.
7. On-Board Monitoring - Denne funksjonen kan brukes til å lese resultatene av on-board diagnostiske overvåkings tester for spesifikke komponenter / systemer.
8. evap System Test - Den EVAP test-funksjonen lar deg starte en lekkasjetest for bilens EVAP systemet. Før du bruker systemtest-funksjonen, se bilens service reparasjoner veiledning for å bestemme prosedyrer som er nødvendige for å stanse testen.
9. Vehicle Information - Alternativet viser kjøretøyets identifikasjonsnummer (VIN), kalibreringsverifiseringsnummerverification (CVN), og annen informasjon av testbilen.
10. Leser generiske (P0, P2, P3, og U0), produsent spesifikke (P1, P3, og U1) koder og ventende koder.
11. Slukke sjekk motoren lys (MIL), slette feilkoder og nullstille monitorer.
12. Les live-PCM datastrøm.
13. Støtter CAN (Controller Area Network) og alle andre.
14. Flerspråkelig meny og feilkode (DTC) definisjoner- engelsk, spansk og tysk, etc.
15. Leser periodiske feilkoder (DTC).
16. Leser permanente feilkoder (DTC).
17. Feilkode oppslag (DTC søk).
18. Støtter alle OBD2 / EOBD test moduser inkluderer: CAN, ISO9141, KWP2000, J1850 VPW og J1850 PWM.
19. Se & Graf live data i farger med lynrask oppdateringsfrekvens for bedre graf og levende dataavlesning.
20. Omfattende Hjelp, Inkludert OBD Parameter, Mode Forklaringer og mere.

Pakken inneholder:

- Diagnoseapparat
- Beskyttende veske i nylon
- USB-kabel
- OBD2 kabel
- Manual
- Minnekort
- Minnekort leser

Spesifikasjoner:

Skjerm: 4.0” farge skjerm, 380 x 320 pixel, skjerm med mulighet til å justere kontrast
Operativ temperatur område (celsius): -20 - 70
Spenning: 9V - 18V

Størrelse:

- L * B * H: 205mm * 110 mm * 31mm
- Vekt: 350g

 

PROFESSIONAL MULTI-SYSTEM CAR DIAGNOSTIC TOOL FR V2.0

FOR CITROEN/PEUGEOT/RENAULT/DACIA +OIL RESET +EPB+BMS+DPF+SAS+ETC+OBDII

iCarsoft FR V2.0 is a Professional and powerful vehicle fault diagnosis tool for Citroen/Peugeot/Renault/Dacia developed by iCarsoft Technology Inc. With a 4.0" TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

① BACK BUTTON--Returns to previous menu.

② UP BUTTON--Moves cursor up for selection.

③ LEFT BUTTON--Moves cursor up for selection.

④ RIGHT BUTTON--Moves cursor down for selection.

⑤ DOWN BUTTON--Moves cursor down for seiection.

⑥ ENTER BUTTON--Confirms a selection(or action)

     from a menu list.

⑦ HELP BUTTON--Shows help information for test

     results or user operation

⑧ F1 FUNCTION BUTTON--In case of special use.

⑨ F2 FUNCTION BUTTON--In case of special use.

⑩ OBDII CONNECTOR--Connects the scan tool to

     the vehicle's Data Link Connector via OBDII Cable.

⑪ STORAGE CARD SLOT--Holds the system of the

     scan tool.

⑫ Data Cable CONNECTOR--Connects the scan tool

     for power supply and update the software if needed.

 
PRODUCT FEATURES

1.iCarsoft FR V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine,

transmission, ABS and airbag etc.
2.Support OBDII/EOBD Ten Modes of Operation
3.Read Live Data 
4.Full ECU Diagnosis
5.Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
6.Easy To Use With Silicone Keys
7.Oil Light/Service Reset: Support service lamp reset.
8.Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for

replacement and initialization.
9.Battery Management System (BMS), registers new battery to the BMS while battery replacement.
10.Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process

while DPF blockage and turn off the DPF indicator.
11.Electronic Throttle Control systems (ETC) relearn the throttle valve control value while clear or replace

the throttle valve.
12.SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or

recalibrates SAS while steering part replacement.
13.The Print Data function allows you printing out diagnostic data recorded by the scan tool or

customized test reports.
14.Battery test allows you getting the voltage of battery with OBD port by the scan tool when

the engine starts.
15.DTC Library to lookup when user is operating this tool.
16.Upgrade via PC.
17.Multi-language: English, German, Dutch, Spanish, French.

 

FIFTEEN SUPER ADVANTAGES

 

Diagnose Single Brand of most Models (OBDII-16DLC)
Full System Diagnosis
Support Oil Service Reset
Electronic Parking Brake (EPB) system maintenance
Battery Management System (BMS)
Diesel Particulate Filter (DPF) Regeneration Control System 
Electronic Throttle Control System (ETC)
Steering Angle Sensor (SAS) Calibration
Read & Clear DTC
Read Live Date
Support Battery Test
Support Data Review and Print
Full Speed Upgrade via PC
4.0″ TFT LCD, 480*320 Pixels
Support Multi-Language

OBDII FUNCTION1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.

8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes

11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream 
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search

 

18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More

 
 
 
SPECIFICATIONS

Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)

 

 

 

Contents:
FR V2.0 Main Unit
TF card (In the main unit)
Main Cable
Data Cable
User Manual

 
CONTENTS
Snittkarakter:
(6) (1 anmeldelse)

Stein T

Takk for handelen!

Enkelt og greit ift bestillingen, og pakken kom i postkassen etter noen få dager. Feilkodeleseren fungerer kjempegodt til Peugeot 206 hvorav den fikk slettet både ABS og airbag-lampa. Ingenting å utsette på, så dere får 5 stjerner fra meg og det er vel fortjent!

(6) (1 anmeldelse)
, 13.06.2016

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.